Can you imagine taking an Instax Mini 11 along on a family trip to take beautiful pictures for the memories, only for the camera to start flashing lights but it won’t take pictures? That is talkable, right? It can spoil a good one of yours. That’s something many Instax users have found. In this blog, we will share some ways to stop the orange blinking light and to ensure that you can always click the memories!
Instax Mini 11 Flashing Solid Orange Light and Not Taking Pictures How to Fix.
The Instax Mini will always blink an orange or red light whenever your camera is charging or getting ready to take a picture. A constant blinking, however, could indicate camera malfunction, such as the camera battery being dead, the lens or cartridge being stuck, or the device having other problems.
- Get new ones for the old AA batteries. Moreover, you should always use batteries of moderate to high alkaline quality as suggested by Fujifilm.
- See if the batteries are put in the right chapter with the ( + ) and the ( – ).
- Put the batteries or charge
- Rub the lens correctly with a lint-free microfibre cloth.
Method 1: Check Cartridge
The camera can’t print the film if the cartridge is not aligned and the cartridge won’t fit into your 11 if the rear door hasn’t been set correctly. That’s why, check if the cartridge is placed properly. Once lined up, the color tab in the camera aligns with the color tab in the back and you just press that back cover firmly till it locks into place. You should hear a click. Then check to see if that blinking lights issue is fixed.
Method 2: Inspect Instax Film
It also can flash an orange light when the film cartridge gets stuck in the film compartment of the Instax 11 Mini camera. When the stuck film will not come out, remove the film and re-insert the batteries. Then, press the shutter button on the camera, then try to take photos. Keep in mind, that if you should expose the film cartridge to heat or direct sunlight, you’ll have to discard the film pack.
Method 3: Look for Damage to New Battery
But if your battery replacement doesn’t fix Instax Mini 11‘s blinking orange light, check to make sure that your new batteries are working properly. If you’ve twisted the new batteries out of their package by accident, or for any other reason they are damaged, the camera won’t work. Therefore, replace these and see if this helps. Use batteries from the same brand and not different brands.
Method 4: Extend Camera Lens
You might also just check if your lens is stuck to the camera because of sticky dust particles that have accumulated over the years around the lens. On the side press the power button and when the camera turns on the lens should be fully extended. There is something wrong with it unless it is. Sometimes, you can gently wiggle the camera and, if the lens comes out, clean it, and maybe that helps. Don’t try to yank the lens out, which can break your camera.
Method 5: Factory Reset
On the contrary, if still none of the methods work out for you, you can factory reset your Instax Mini 11 to bring the settings back to normal and you can allow you to take pictures again.
- Just push the power button to turn the camera off.
- Open the lid on the camera battery compartment and proceed to the camera.
- On the photo buttons, press and hold for 5 to 10 seconds.
- Feel the lid closed properly and switch on the camera.
The orange light will stop blinking and your camera will be reset ready to take a picture.
Method 6: Contact Instax Support for an upgrade to Software or Hardware
If the orange flashing light on Instax becomes a thing, you can only your last resort would be to fill up Instax Support and complain about your issue. Aziz, if you have a warranty your camera will be repaired by skilled technicians.
What does solid orange light mean from Instax Mini?
The orange light in Mini 11 tells you how good your camera is. If your camera has a solid orange light, you are at the perfect starting point for your camera. To get the camera to take pictures, you just push the shutter button. If, however, the orange light is blinking, that means there’s some sort of functional issue that needs to be fixed.
Maintaining Your Instax Mini 11 – Tips
Just as you are taking care of any other gadget, you have to take special care when taking care of your Instax Mini so that it might work longer. Here are some tips you can follow to ensure that your camera is always maintained:
- Loading film does best in the shade and away from direct sunlight.
- Kept properly, the Instax photos won’t fade but it’s always best to store your Polaroids in an album or box.
- Avoid water on films.
- To remove dust and fingerprints frofrfro forms, clean your lens with a lint-free cloth.
- Don’t use harsh surfaces for the camera, like the lens or back door, and avoid keeping it on for a long time.
- If you’re traveling with it, make sure you have a protective case for it.
How to Reset Instax Mini 11
Follow the steps Method 5: If you’re reading How to Fix Instax Mini 11 Flashing Solid Orange Light and Not Taking Pictures, you can Factory Reset.
